- There are no alternate images available for this product.
Klenedraw W-4884
KLENEDRAW W-4884 is a synthetic solution formulated as a lubricant for metal stamping and drawing operations. It does not contain petroleum oil. KLENEDRAW W-4884 will provide lubrication for tough metal forming operations. It has excellent wetting characteristics and interacts with metal surfaces to produce a high strength boundary and chemical extreme pressure lubricating film. KLENEDRAW W-4884 dries to a soft non-sticky residue that cleans easily in low temperature aqueous wash systems. Its chemistry is non-hazardous under OSHA regulations and does not require hazard pictograms on the label.
Usage
KLENEDRAW W-4884 can be used to form high strength steel alloys, stainless steel, zinc coated steel, and aluminum. It can be used as a straight concentrate or at dilutions up to 15:1 with water. Add KLENEDRAW W-4884 to water and mix until it forms a pure solution with the water. It can be applied using airless spray systems, drip, roller coater or flood methods. Parts are easily cleaned in aqueous wash systems using an alkaline cleaner at a low concentration.
be applied using airless spray systems, drip, roller coater or flood methods. Parts are easily cleaned in
aqueous wash systems using an alkaline cleaner at a low concentration.
Benefits
- Very Operator-Friendly Product
- Contains No Hazardous Ingredients
- Affords Excellent In-Process Rust Protection
- Cleans Easily In Low Temperature Water Based Solutions
- Replaces Straight Compounded Oils & Produces an Extreme Pressure Lubricating Film
- Performs Heavy-Duty Operations at Extended Dilutions & Weld Through Without Cleaning
Documents