Klenendraw W-4898

Enlarge

There are no alternate images available for this product.

Klenendraw W-4898

KLENEDRAWW-4898 is a synthetic solution formulated as a lubricant for metal stamping and drawing operations. It does not contain petroleum oil. KLENEDRAW W-4898 will provide lubrication for very heavy-duty metal forming operations. It has excellent wetting characteristics and interacts with metal surfaces to produce a high-strength boundary and chemical extreme-pressure lubricating film. KLENEDRAW W-4898 dries to a soft non-sticky residue that cleans easily in low-temperature aqueous wash systems. Its chemistry is non-hazardous under OSHA regulations and does not require hazard pictograms on the label.

Metal Forming and Drawing Klenedraw Synthetic

Usage

KLENEDRAW W-4898 can be used to form high-strength steel alloys, stainless steel, zinc-coated steel, and aluminum. It can be used as a straight concentrate or at dilutions up to 19:1 with water. Add KLENEDRAW W-4898 to water and mix until it forms a pure solution with the water. It can be applied using airless spray systems, drip, roller coater or flood methods. Parts are easily cleaned in aqueous wash systems using an alkaline cleaner at a low concentration.

Benefits

Non-Hazardous, No Pictograms Required
Soft Non-Sticky Residue
Affords Excellent In-Process Rust Protection
Cleans Easily In Low Temperature Water Based Solutions
Replaces Straight Compounded Oils & Produces and Extreme Pressure Lubricating Film
Performs Heavy-Duty Operations at Extended Dilutions & Weld Through Without Cleaning

Documents

Product Technical Data Sheets

4898-W Klenedraw PDS

SDS sheets

4898-W Klenedraw SDS

Phone: 773.927.6161