KLENEDRAW® W-4177 should be used as a straight concentrate, or at dilutions up to 20:1 with tap water. It can be applied in minimal amounts by using Jet-Set® airless spray, drip, roller coater or similar methods. KLENEDRAW® W-4177 is used on ferrous metals, stainless steel, zinc coated metal, and aluminum. It is typically used on material up to 0.100” (2.5 mm) thick. KLENEDRAW® W-4177, run at 4:1, will provide rust protection to ferrous parts stored inside for over 90 days. It can be cleaned with warm water or a weak solution of alkaline cleaner such as TOWERKLENE 42-A run at a 2% – 5% concentration.